Light Module CONTROL
The Light Module CONTROL is the basis for the LINEAR and the DIFFUSE light module. It is ready to be connected to the light modules and includes the Control Unit.
Partition Wall
The Partition Wall allows, for example, existing wall openings to be temporarily closed and individual rooms or areas to be separated fast and with little effort.
The Fusebox (Small)
The Fusebox operates as single power access point for all required electric equipment of a space. Equipped with power supply sockets (2x 400 V, 4x 230 V, 4x 24V) as well as WiFi Access Point and Ethernet.
Control Unit
The control unit is a 24V supplied radio-controlled board that allows you to control lights. The output has two channels to enable light sources with Tunable White.
Lens
The lens is the key element for the LINEAR light module. It focuses the light of the LED Stripe to about 60° beam angle transverse to the axis. A simple, non-proprietary solution was chosen. You can alternatively choose desired lenses with different beam angles from manufacturer an attach them also.
Perforated Sheet Metal
The perforated sheet metal is formed into a tube and acts as carrier material for all four light modules.
Plug Socket
The plug socket element makes the electrical connection easy. The 3D printed part which outer diameter fits exactly in the tube of the light modules. Inside it is a standard plug socket for jack or DC plugs.
The Socket
Low-Tech solution to fix multi distribution socket. The socket is to be equipped with a simple loop made of rope cord which can be used to hang the socket onto the connector or any other place in the room. Alternatively, to hold the socket in place magnets can be added on the back of the socket.
Office
Story / Motivation The goal behind developing the objects and elements for the different modules is to create flexible spaces. These spaces can therefore be used for different purposes resulting in variety of use-case scenarios. Examples for office-, living-, atelier- and workshop spaces are given here. An office space is easily created with the polymorphic […]
Workshop
Story / Motivation The goal behind developing the objects and elements for the different modules is to create flexible spaces. These spaces can therefore be used for different purposes resulting in variety of use-case scenarios. Examples for office-, living-, atelier- and workshop spaces are given here. Thanks to their optimized, functional design the objects and […]
